Monday, November 30, 2009

Tea Tins
















Materials

2.6″ Round Tin
Full Sheet Labels
Round Tea Bags
2″ Hole Punch
X-Acto Knife
Straight edge
Healing Mat
Color Printer
Vellum Paper (optional)

NOTES:
The tea tin requires 2 labels: (a) 2″ circle for the top AND (b) 6″ x 1″ rectangular to wrap around the side

Instructions

1. Create artwork for the top and side labels. Since you have 2 areas to work with, the possibilities are endless. Keep in mind though – if the tin is sitting on a table – the tops will be more visible than the sides. Suggested: Put your name or initials on the top and the kind of tea on the sides.

Tips about preparing artwork for print: If your design has bleeds (artwork that flush with the edge of the label) make sure you extend your artwork past the “cutline.” This allows you to avoid those pesky and unwanted white edges for when you trim the labels. Also, include cropmarks to guide you in cutting out the rectangular label.

2. Print out your designs – in color – onto the full sheet labels.

3. Using the 2″ circle punch, punch out the circular labels for the lid. To ensure your punch is centered, turn it upside down so you can see the design and where you are punching.

4. Adhere the circular label to the center of the tin’s lid.

5. With a straight edge and x-acto and using the cropmarks as guides, cut out your wrap labels.

7. Adhering the wrap label is a little trickier. Start in the center but allow the label to touch just enough so that it is barely sticking. This allows you to make adjustments so you can ensure the label is positioned squarely with the tin. Once straight, press the label from the center to its outer edges until it wraps all the way around.

8. Fill the tin with just enough tea bags (about 10 bags).

Optional…You can also include a round vellum insert to sit on top of the tea bags. This gives you another area to add artwork or information such as instructions on steeping the tea or a personal note from the bride and groom!

No comments:

Post a Comment